Precautions when using the busbar machine

The main function of the busbar machine is to process copper and aluminum busbars of different specifications. It has five processing units: shearing, punching, large bending and small bending. It is suitable for the construction of large-scale electric control boxes and transmission and distribution construction projects. Busbars refer to multiple devices in the form of parallel branches. What is the point to pay attention to when operating the busbar? Let's take a look at the following with Xiaobian:
    1, the bus machine boot
    Close the air switch in the electrical box and turn the "control power" key switch to the "I" position to control the power on. At this time, the “Power On” indicator on the main panel lights up.
    2, bus machine bending unit work
    Turn the “Bending Work” knob on the main operation panel to the working position. At this time, the “Bending Work” indicator on the main panel lights up. If you press the bending unit or the corresponding knob, the slider will move forward. Until you hit the front dead-end switch, go to the original form. If the slider is in the process of grabbing the pedal or the corresponding knob, the slider will abort. At this time, if the pedal electromechanical door or the corresponding knob is stepped on, the slider continues to advance; if the "backward" knob on the panel of the bending unit is pressed, the slider returns to the original form to abort.
    3, bus machine cutting unit work
    Put the “cut work” button on the main operation panel to the task position. At this time, the “cut work” indicator light on the main panel lights up. Step on the cutting unit pedal or the corresponding knob, the slider will go down. Until you hit the bottom dead center switch, go to the bottom dead point. If the slider is pulled down during the descent process or the corresponding button is pressed, the slider will stop. At this time, if the foot switch or the corresponding button is pressed, the slider continues to descend; if the "up" button on the panel of the cutting unit is pressed, the slider is raised to the top dead center to stop.
    The above is to pay attention to three aspects when using the busbar machine, and usually pay more attention to the maintenance of the machine.